TIC TAC TOE FINAL ASSIGNMENT

Write the code to make your program say "Player wins," "AI wins," or "Nobody wins" when the game ends.

Final Dice Roller Assignment

• Complete the dice roller program so that it works as shown in the videos.

• Create a color blend using two different colors based on height.

• Print which DICE NUMBER was rolled the most often (not the number of times rolled). For example, if the biggest number in your results list is 25152, which dice number is represented by that. In order to test -- on two dice with 100,000 dice rolled, it will probably be 7.

Assignment #1

Build a house shape using cube, translate and rotate commands.

Assignment #2

Build a complex object with multiple, different primitives (a car would be a good object, for example, because you can use cylinders for wheels, cube for the body, etc).

Final Project

Your task for the OpenSCAD final project is to create a 3D printable solution to a problem. This could be a new invention or a novel variation on an existing solution. It could adapt / interface with an existing device or be a new idea. Take some time to generate several potential problems / solutions / ideas. Before beginning your final design, you will turn in a list of 10 potential ideas along with some simple sketches to illustrate your designs. It will be very important to have a well thought out sketch to model from BEFORE beginning your coding.

The following considerations will be expected in your project:

1. The design must be printable. This means you have thought about the build plate and made sure your design can be supported as 3D printing occurs. This may mean splitting your design into multiple pieces.

2. The design must be use variables. I will expect to see that variables are fully integrated into your design and allow quick refinement of your design between test prints.

3. The design must be functional. The design must solve a problem or be useful in some way.

Assignment #3:

Create a box as shown in the video above. The center should be cut away from the side with a second box using difference. The edges should be 2mm in thickness.

In addition, the box should have at least one dividing wall inside it.